• Sign In
  • Register
TRADE ONLY - LOGIN OR CLICK HERE TO REQUEST A NEW ACCOUNT

Search results for 'loctite'

Page
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

List  Grid 

  • Activator 7649 - 150ml

    S.51875 - Activator 7649 - 150ml

    LOCTITE® 7649 Activator (150ml). Suitable for promoting the speed of cure.
  • Threadlocker 222 - 10ml

    S.14947 - Threadlocker 222 - 10ml

    LOCTITE® 222 Threadlocker (10ml). A low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
  • LOCTITE 7850 Hand Cleaner 3L

    S.14773 - LOCTITE 7850 Hand Cleaner 3L

    Fast Orange Hand Cleaner 7850 Environmentally friendly hand cleaner made from citrus oils. Contains pumice to help remove ground-in dirt, tar, grease and oil, as well as skin conditioners. Ideal for use anywhere as water is not required.
  • LOCTITE 7850 Hand Cleaner 400ml

    S.14772 - LOCTITE 7850 Hand Cleaner 400ml

    Fast Orange Hand Cleaner 7850 Environmentally friendly hand cleaner made from citrus oils. Contains pumice to help remove ground-in dirt, tar, grease and oil, as well as skin conditioners. Ideal for use anywhere as water is not required.
  • LOCTITE-METAL SET 25ML

    S.14771 - LOCTITE-METAL SET 25ML

    Metal Set For repairing or filling iron, steel, brass, bronze, aluminium, copper, wood and concrete. Sets in 15 minutes. Can be drilled, filed, tapped, machined or painted. Resists temperatures up to 120°C.
  • Fast Epoxy 3430 - 24ml

    S.14769 - Fast Epoxy 3430 - 24ml

    LOCTITE® 3430 Fast Epoxy (24ml). Bonds ceramics, wood, metal, glass and plastics. Can be painted. Suitable for bonding or filling gaps.
  • Gasket Sealant 5926 - 40 ml

    S.14768 - Gasket Sealant 5926 - 40 ml

    LOCTITE® 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic. This product resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54 °C to 204 °C. Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted parts Resists vibration, thermal expansion and contraction Operating temperature range of -54 °C to +150 °C.
  • Gasket Sealant 5922 - 60ml

    S.14767 - Gasket Sealant 5922 - 60ml

    LOCTITE® 5922 Flange Sealant (60ml). A non-hardening sealant used to seal all types of pre-cut gaskets. Resists temperatures up to 200°C.
  • Super Glue 401 - 20gr

    S.14765 - Super Glue 401 - 20gr

    LOCTITE® Superglue 401. For all instant repairs on metal rubber and plastics.
  • LOCTITE-SUPERGLUE 5GR

    S.14764 - LOCTITE-SUPERGLUE 5GR

    Superglue 3 Suitable for use with metal, rubber and plastics. Bonds in seconds.
  • Quick Metal 660 -50ml

    S.14763 - Quick Metal 660 -50ml

    LOCTITE® 660 Quick Metal Press Fit Repair (50ml). Especially suited for filling gaps up to 0.25mm. Ideal for restoring worn fits of parallel keys, splines and tapers. Not to be used for metal rebuild. For filling gaps between worn metal parts (up to 0.25mm).
  • Retainer 603 - 50ml

    S.14762 - Retainer 603 - 50ml

    LOCTITE® 603 Retainer, Green (250ml). High strength, oil tolerant. Ideal for retaining close fitting cylindrical parts where degreasing is not possible. Approved for use on bearings. Service Range: -55°C - + 150°C. Tensile sheer strength: >22.5 N/mm².
  • Gasket Eliminator 518 - 50ml

    S.14761 - Gasket Eliminator 518 - 50ml

    LOCTITE® 518 Gasket Eliminator (50ml). For sealing rigid flange faces, e.g. water pump flanges, engine, differential and timing covers. Seals instantly against low pressures. Fills gaps up to 0.5 mm max. Temperature range -55°C to +150°C.
  • Thread Sealant 577 - 50ml

    S.14760 - Thread Sealant 577 - 50ml

    LOCTITE® Thread Sealant (50ml). For straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time. LOCTITE® 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application. NEW: Henkel has recently improved the product formulation of LOCTITE® 577 providing: Higher strength on contaminated surfaces Improved thermal performance High performance on passive metals without an activator •Medium-strength, general purpose thread sealant for sealing metal threads •Suitable for all metals •Instant low pressure seal •Excellent chemical resistance •Locks connection against vibration-induced loosening and other stresses •Easy to apply •Cures on active and inactive metals •NSF P1 Reg. No. 123001 •DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312.
  • Thread Sealant 542 - 50ml

    S.14759 - Thread Sealant 542 - 50ml

    LOCTITE® 542 Thread Sealant (50ml). Designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The Thixotropic nature of LOCTITE® 542 reduces the migration of liquid product after application to the part.
Page
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

List  Grid 

The Sparex website uses cookies to enhance your shopping experience, to improve functionality and to analyse website traffic.
For more information on how we use cookies please click here to read our privacy policy.

© Sparex Ltd. All rights reserved. Sparex Limited is a company registered in England & Wales with number 841771 and VAT Number GB 754 8199 87

These parts are Sparex parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer's names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.