LOCTITE® 7455 Activator (150ml).General purpose.Increases cure speed on passive & inactive surfaces.Provides excellent aesthetic appearance of bond line.Suitable for stress cracking sensitive plastics.Fast fixing between close fitting parts.
LOCTITE® 7471 Activator (150ml).Activator for threadlocking pipe, threadsealing gaskets, retaining & Anaerobic acrylics.Increases cure speed on passive & inactive surfaces.Recommended for use on passive metals, plated or passive surfaces.
LOCTITE® 480 Instant Adhesive (20g).Cures very quickly when confined between surfaces. Clean & easy to apply.Joins a variety of dissimilar materials.Free of solvents.Fixture time: 20-50secs.Viscosity: 150mPa's.Service Range: -40 - +100°C
LOCTITE® SF 7200 Chisel Areosol (400ml).Designed to remove cured chemical gaskets by softening the material on the flanges.Once applied, the product develops a foam-like layer on the gasket, preventing the agent from running off the desired location. It therefore keeps working for the required duration.Typical applications include removal of all types of chemical gaskets from metal flanges.Particularly suitable for aluminium or other soft metal flanges where scraping could lead to surface damage.
LOCTITE® 515 Gasket Eliminator (50ml).Replacement for pre-cut gaskets.Fills gaps to .010 (0.25mm) and does not shrink.Continuous operating temperature range of -60°F to 300°F.Cures to a flexible seal 1-8 hours.
LOCTITE® 518 Gasket Eliminator (50ml).For sealing rigid flange faces, e.g. water pump flanges, engine, differential and timing covers.Seals instantly against low pressures.Fills gaps up to 0.5 mm max.Temperature range -55°C to +150°C.
LOCTITE® 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket.Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.This product resists ageing, weathering and thermal cycling without hardening, shrinking or cracking.Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings.This product is typically used in applications with an operating temperature range of -54 °C to 204 °C.Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted partsResists vibration, thermal expansion and contractionOperating temperature range of -54 °C to +150 °C.
Fast Orange Hand Cleaner 7850 Environmentally friendly hand cleaner made from citrus oils. Contains pumice to help remove ground-in dirt, tar, grease and oil, as well as skin conditioners. Ideal for use anywhere as water is not required.
Low Strength Threadlocker. Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws. Good on low strength metals which could break during disassembly, e.g. aluminium or brass.
LOCTITE® 641 Bearing Fit (50ml).Designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations.The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.
LOCTITE® SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE SF 7063 removes most greases, oils, lubrication fluids and metal cuttings.
LOCTITE® SF 7235 is a solvent formulation aerosol spray designed to remove dirt, oil, grease, brake fluid, and brake dust deposits from brake callipers, drums, disks, cylinders, pads, linings, shoes and surrounding components. Its superior wetting action makes it suitable for brake and clutch systems still equipped with asbestos components. Not recommended for cleaning plastic or rubber parts.metals.
Metal Set For repairing or filling iron, steel, brass, bronze, aluminium, copper, wood and concrete. Sets in 15 minutes. Can be drilled, filed, tapped, machined or painted. Resists temperatures up to 120°C.
LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flange connections. The nature of LOCTITE® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
LOCTITE® 243 Threadlocker (10ml) A general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
LOCTITE® 243 Threadlocker (50ml).A general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
LOCTITE® 660 Quick Metal Press Fit Repair (50ml).Especially suited for filling gaps up to 0.25mm.Ideal for restoring worn fits of parallel keys, splines and tapers.Not to be used for metal rebuild.For filling gaps between worn metal parts (up to 0.25mm).
LOCTITE® 603 Retainer, Green (250ml).High strength, oil tolerant.Ideal for retaining close fitting cylindrical parts where degreasing is not possible.Approved for use on bearings.Service Range: -55°C - + 150°C.Tensile sheer strength: >22.5
LOCTITE® 638 Retainer, Green (50ml).High Strength Retainer increases torsional strength and enables slip-fitted parts to withstand higher cyclic loading's.To retain and seal heavy duty parts.Typical fixture time is 5 minutes.
LOCTITE® 648 Retainer, Green (250ml).High strength retainer.Ideal for retaining of parts with a clearance or interference fit, i.e. retaining bushes, bearings, seals, fans, and liners.Increased temperature resistance.WRC Approval (BS 6920): 0808532.
LOCTITE® 603 Retainer, Green (250ml).High strength, oil tolerant.Ideal for retaining close fitting cylindrical parts where degreasing is not possible.Approved for use on bearings.Service Range: -55°C - + 150°C.Tensile sheer strength: >22.5 N/mm².