Hoses

Set Descending Direction
Page
per page

101

FILTER
  • Air hoses (Ragno PU), Hose ID: 13mm (1/2'')
    S.135807

    Air hoses (Ragno PU), Hose ID: 13mm (1/2'')

    Hose OD: 19mm Working pressure: 20 (23°C), 17 (40°) & 15 (60°C) Bursting pressure: 60 Temperature range: -15°C/+60°C Roll Length: 30m Sold in multiples of: Roll Antiabrasive polyurethane and thermo-plastic rubber compound hose with polyester yarn reinforcement for pneumatic tools in general, airbrushes and water based paint sprayers
  • Airline Hose 1/4'', 10m
    S.14224

    Airline Hose 1/4'', 10m

    HOSE-AIRLINE-1/4- 30FT COIL
  • Airline Hose 3/8'', 10m
    S.14226

    Airline Hose 3/8'', 10m

    HOSE-AIRLINE-3/8-30FT COIL
  • Airline Hose 5/16''x 10m
    S.14225

    Airline Hose 5/16''x 10m

    "Air & Water Hose (Length: 10m). Working Pressure: 300 PSI (20 Bar) with a 3:1 safety factor. Hose I/D: 7.9mm (5/16""). Hose O/D: 16.5mm (5/8"")"
  • Braided Fuel hose - 3 x 7mm x 15M
    S.19154

    Braided Fuel hose - 3 x 7mm x 15M

    Fuel Hose (specially designed for unleaded fuels). (Supplied in 15m reel). Inner Wall: Smooth Black NBR Rubber. Outer Wall: Covered in high tensile polyester overbraid, resistant to abrasion, fuel, oil and weathering. Hose I/D: 3mm. Hose O/D: 7mm. Braided
  • BRAIDED FUEL HOSE 4.5MMX1M
  • Compressor Hose
    S.64768

    Compressor Hose

    This hose can be used with any machine with an air supply or air brakes its supplied with a screw coupler at one end and snap on connector at the other alowing you to use it with a air line gauge to fill the tyres or connect an air blow gun to it to clean the radiator out etc. (Thread size for inlet fitting: 16mm)
  • Convoluted Radiator Hose
    S.56094

    Convoluted Radiator Hose

    Length: 1m. Working Pressure: 1 bar. Burst Pressure: 3 bar. Temperature range: -30° to +110°C. Hose I/D: 51mm (2"). Material: Black Rubber
  • Convoluted Radiator Hose
    S.56093

    Convoluted Radiator Hose

    Length: 1m. Working Pressure: 1 bar. Burst Pressure: 3 bar. Temperature range: -30° to +110°C. Hose I/D: 45mm (1.3/4"). Material: Black Rubber
  • Convoluted Radiator Hose
    S.56072

    Convoluted Radiator Hose

    Length: 1m. Working Pressure: 1 bar. Burst Pressure: 3 bar. Temperature range: -30° to +110°C. Hose I/D: 38mm (1.1/2"). Material: Black Rubber
  • Convoluted Radiator Hose
    S.56026

    Convoluted Radiator Hose

    Length: 1m. Working Pressure: 1 bar. Burst Pressure: 3 bar. Temperature range: -30° to +110°C. Hose I/D: 32mm (1.1/4"). Material: Black Rubber
  • Convoluted Radiator Hose
    S.56023

    Convoluted Radiator Hose

    Length: 1m. Working Pressure: 1 bar. Burst Pressure: 3 bar. Temperature range: -30° to +110°C. Hose I/D: 25mm (1"). Material: Black Rubber
  • Cutting ring DS12/14 (HYDRAULIC OLIVE)
  • Diesel Hose (Supplied per metre)
    S.18497

    Diesel Hose (Supplied per metre)

    HOSE-DIESEL 1 1M
  • Fuel & oil hose (Polipo 15 Bar), Hose ID: 19mm (3/4'')
    S.135665

    Fuel & oil hose (Polipo 15 Bar), Hose ID: 19mm (3/4'')

    Hose OD: 26mm Working pressure: 15 (20°C), 10 (40°C) & 6 (60°C) Temperature range: -10°C/+60°C Roll Length: 50m Sold in multiples of: Roll Soft PVC hose with POLYURETHANE (PU) underlayer with polyester yarn reinforcement and PU adhesive middle layer, for pressurized transfer of oil, diesel oil, bio diesel, urea AD Blue (ISO 22241).
  • Fuel Delivery Hose (4m)
    S.27839

    Fuel Delivery Hose (4m)

    Max. Pressure: 300PSI (20 bar). Connection Threads: 1" to 1" BSP. I.D: 3/4".
  • FUEL HOSE
    S.31249

    FUEL HOSE

    Nominal I/D:9.3mm. Hose O/D: 15.3mm.
  • FUEL HOSE
    S.31248

    FUEL HOSE

    Supplied in 1 metre lengths. Nominal I/D: 6mm. Hose I/D: 7.5mm. Hose O/D: 13.50mm.
  • FUEL HOSE
    S.31247

    FUEL HOSE

    Supplied in 1 metre lengths. Nominal I/D: 4mm. Hose I/D: 5.5mm. Hose O/D: 11.5mm.
  • FUEL HOSE
    S.31246

    FUEL HOSE

    Supplied in 1 metre lengths. Nominal I/D: 2mm. Hose I/D: 4.5mm. Hose O/D: 10.5mm
  • Fuel Hose (Vacupress Oil) Hose ID: 25mm
    S.135846

    Fuel Hose (Vacupress Oil) Hose ID: 25mm

    Roll Length: 60MSold in multiples of: RollTemperature range: -25°C/+55°C
  • FUEL LINE NON RET VALVE 10MM
    S.37234

    FUEL LINE NON RET VALVE 10MM

    Non Return Valve. Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting. Hose I/D: 10mm.
  • FUEL LINE NON RET VALVE 12MM
    S.37218

    FUEL LINE NON RET VALVE 12MM

    Non Return Valve. Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting. Hose I/D: 12mm.
  • Hand Primer with Non Return Valves, 10mm (Economy)
  • Hand Primer with Non Return Valves, 8mm (Economy)
  • Heater Hose 1/2'' x 10m
    S.14704

    Heater Hose 1/2'' x 10m

    High strength polyester yarn - 2 ply (Length: 10m). I/D: 13mm (1/2")-35° to +100°C
  • Heater Hose 3/4'' x 10m
    S.14706

    Heater Hose 3/4'' x 10m

    High strength polyester yarn - 2 ply (Length: 10m). I/D: 19mm (3/4") -35° to +100°C
  • Heater Hose 5/8'' x 10m
    S.14705

    Heater Hose 5/8'' x 10m

    High strength polyester yarn - 2 ply (Length: 10m). I/D: 16mm (5/8") -35° to +100°C
  • Heating hose 12.5 x 19.5 DIN 73411
  • Heating hose 16.0 x 23.0 DIN 73411
  • Heating hose 19.0 x 27.0 DIN 73411 Priced per M
  • HOSE
    S.31241

    HOSE

    Plastic Hose (I.D. 4mm, 10m Fixed Length)
  • HOSE
    S.31240

    HOSE

    Plastic Hose (I.D. 3mm, 10m Fixed Length)
  • HOSE FERRULE 12.5X7.3MM NW4
    S.31262

    HOSE FERRULE 12.5X7.3MM NW4

    Ferrules for oil/fuel resistant hose. Nominal I/D: 4mm. Hose O/D: 12.5mm. Hole Ø7.3mm.
  • HOSE FERRULE 13.5X9.3MM NW6
    S.31263

    HOSE FERRULE 13.5X9.3MM NW6

    HOSE FERRULE FOR S.31253
  • HOSE FERRULE 16.0X11.3MM NW8
    S.31264

    HOSE FERRULE 16.0X11.3MM NW8

    Ferrules for oil/fuel resistant hose. Nominal I/D: 8mm. Hose O/D: 16.0mm. Hole Ø11.3mm.
  • HOSE FERRULE 18.0X13.4MM NW10
    S.31265

    HOSE FERRULE 18.0X13.4MM NW10

    Ferrules for oil/fuel resistant hose. Nominal I/D: 10mm. Hose O/D: 18.0mm. Hole Ø13.4mm.
  • Hose Ferrules (225 pcs.)
    S.31257

    Hose Ferrules (225 pcs.)

    An assortment of our most popular fuel line fittingsContains: 115 x Ferrules, 30 x Union Nuts, 25 x Banjo Connectors, 30 x Conical Connectors & 25 x Threaded Connectors With nominal I/D's of 4mm, 6mm, 8mm & 10mm.
  • Hose Tail - 1''
    S.18499

    Hose Tail - 1''

    1 Bore Hose Tail
  • HOSE TAIL-1'' A'PAK
    S.25709

    HOSE TAIL-1'' A'PAK

    Hose Tail (1" BSP). Suitable for use with S.8457 Gravity Feed Hose.
  • Hose, Oil/Fuel - 10mm x 17mm x 1m
    S.56403

    Hose, Oil/Fuel - 10mm x 17mm x 1m

    Oil & Petrol Hose (Supplied per metre. Max: 50m). Inner Wall: Smooth Black NBR Rubber (Nitrile). Outer Wall: Smooth Black CR Rubber (Neoprene). Oil & Petrol resistant. Temp: -30° to +100°C. Hose I/D: 10mm. Hose O/D: 17mm.
  • Hose, Oil/Fuel - 12.5mm x 21.5mm x 1m
    S.56404

    Hose, Oil/Fuel - 12.5mm x 21.5mm x 1m

    Oil & Petrol Hose (Supplied per metre. Max: 50m). Inner Wall: Smooth Black NBR Rubber (Nitrile). Outer Wall: Smooth Black CR Rubber (Neoprene). Oil & Petrol resistant. Temp: -30° to +100°C. Hose I/D: 12.5mm. Hose O/D: 21.5mm.
  • Hose, Oil/Fuel - 16mm x 25.4mm x 1m
    S.56405

    Hose, Oil/Fuel - 16mm x 25.4mm x 1m

    Oil & Petrol Hose (Supplied per metre. Max: 50m). Inner Wall: Smooth Black NBR Rubber (Nitrile). Outer Wall: Smooth Black CR Rubber (Neoprene). Oil & Petrol resistant. Temp: -30° to +100°C. Hose I/D: 16mm. Hose O/D: 25.4mm.
  • Hose, Oil/Fuel - 20mm x 30mm x 1m
    S.56406

    Hose, Oil/Fuel - 20mm x 30mm x 1m

    Oil & Petrol Hose (Supplied per metre. Max: 50m). Inner Wall: Smooth Black NBR Rubber (Nitrile). Outer Wall: Smooth Black CR Rubber (Neoprene). Oil & Petrol resistant. Temp: -30° to +100°C. Hose I/D: 20mm. Hose O/D: 30mm.
  • Hose, Oil/Fuel - 25mm x 36mm x 1m
    S.56408

    Hose, Oil/Fuel - 25mm x 36mm x 1m

    Oil & Petrol Hose (Supplied per metre. Max: 50m). Inner Wall: Smooth Black NBR Rubber (Nitrile). Outer Wall: Smooth Black CR Rubber (Neoprene). Oil & Petrol resistant. Temp: -30° to +100°C. Hose I/D: 25mm. Hose O/D: 36mm.
Set Descending Direction
Page
per page

101